Enquire about or pre-register for Enlit Europe 2026 in Vienna
More info
Home
/
Mitsubishi reports success in hydrogen blend test using Georgia Power M501G turbine

Mitsubishi reports success in hydrogen blend test using Georgia Power M501G turbine

Power Engineering International
Posted on: 14 June 2022

Mitsubishi Power said it validated a 20% fuel blend of hydrogen and natural gas at both load partial and full load on an M501G natural gas turbine.

Plant McDonough-Atkinson Power Plant. Image credit: Georgia Power

Mitsubishi Power said it validated a 20% fuel blend of hydrogen and natural gas at both load partial and full load on an M501G natural gas turbine at Georgia Power’s McDonough-Atkinson plant in Smyrna, Georgia, US. 

The demonstration project was the company’s first to validate the hydrogen fuel blend in one of its Advanced Class gas turbines in North America, and the largest test of its kind to date. It said the 20% blend provided a roughly 7% cut in carbon emissions compared to natural gas.

Utility company Georgia Power and the Electric Power Research Institute (EPRI) worked with Mitsubishi Power on the test.

Have you read?
Hydrogen test begins at power plant with reciprocating engines
Mitsubishi tests carbon capture technology in gas engine gensets

The McDonough-Atkinson plant facility is around 10 miles from downtown Atlanta, and was converted to natural gas in 2012. It currently operates six M501G series gas turbines with a combined generating capacity of 2,520MW. It also operates three steam turbines operating in three blocks of 2-in-1 combined cycle configuration.

Mitsubishi Power said it completed hydrogen blending in an M501G gas turbine unit with an output of around 265MW. It said the dry hydrogen mixture with low NOx content was successful by up to 20% at the projected 100% natural gas combustion temperature, within emissions compliance for the existing air permit, and with no impact on maintenance intervals. The team also was said to have confirmed improved reduction by testing up to 20% hydrogen at a minimum charge that meets emission standards.

Mitsubishi Power provided engineering, planning, hydrogen blending hardware, controls, commissioning and risk management services. Certarus provided and managed the hydrogen supply. 

Earlier this year, Mitsubishi said that construction was underway for a hydrogen testing facility in Japan. 

EPRI researchers were present during the tests, and the organisation is expected to release a report on the results later this summer. 

Originally published on power-eng.com

Share:
Join the community for freeAnd get access to all content

Latest content

Latest in Generation

All articles